{"text_format":"3","workbook":"xlsx","n_sheets":4,"sheets":["1-4","2-4","3-4","4-4 "],"not_rendered":{"images":14,"macros":1,"defined_names":4},"read":"whole","date_system":"1900"}

{"sheet":"1-4","index":0,"n_rows":67,"n_cols":119,"rows_kept":67,"merged":[[0,28,2,54],[3,0,4,1],[3,2,4,7],[3,8,4,9],[3,12,4,17],[3,18,4,37],[3,38,4,54],[14,0,15,10],[14,13,15,15],[14,22,15,54],[16,0,17,1],[16,2,17,10],[16,14,17,19],[16,24,17,33],[16,36,17,37],[16,40,17,49],[19,0,20,54],[21,0,22,1],[21,2,22,26],[21,29,22,54],[23,0,24,1],[23,2,24,26],[23,29,24,54],[26,0,27,54],[28,0,29,14],[28,15,29,18],[28,19,29,20],[30,0,31,10],[30,15,31,22],[30,26,31,31],[32,0,33,18],[32,22,33,27],[32,30,33,35],[32,38,33,43],[34,0,34,30],[34,34,34,41],[34,47,34,52],[36,0,37,9],[36,13,37,15],[36,22,37,54],[38,0,39,1],[38,2,39,15],[38,24,39,31],[38,40,39,46],[40,0,41,54],[43,0,44,54],[45,0,46,1],[45,2,46,12],[45,27,46,28],[45,29,46,48],[47,0,48,1],[47,2,48,54],[50,0,51,54],[52,0,53,1],[52,2,53,6],[52,12,53,13],[52,14,53,17],[52,24,53,25],[52,26,53,29],[52,35,53,36],[52,37,53,40],[52,45,53,46],[52,47,53,54],[55,0,56,20],[55,24,56,27],[55,31,56,54],[58,5,58,11],[58,42,58,51]]}
[{"$nulls":28},"SUBMERGED 1/4"]
[]
[]
[null,null,"ORDER",{"$nulls":9},"QUOTATION",{"$nulls":5},"Client REF :",{"$nulls":19},"Date :"]
[]
[]
["Bill to :",{"$nulls":25},"Delivery Adress:"]
[{"$nulls":26},"Name :"]
[{"$nulls":26},"Address:"]
[{"$nulls":26},"City.",{"$nulls":22},"Zip Code :"]
[{"$nulls":26},"Tel."]
[{"$nulls":26},"contact Name:",{"$nulls":15},"contact Tel"]
[]
[]
["Transport",{"$nulls":12},"No",{"$nulls":8},"Yes (Please advise transport instructions below)"]
[]
[null,null,"38 T lorry",{"$nulls":11},"Small Truck",{"$nulls":9},"Forklift",{"$nulls":15},"Customer pick up"]
[]
[]
["Type of roller"]
[]
[null,null,"Roussillon ll with motor inside pit",{"$nulls":26},"Roussillon ll with motor at water level"]
[]
[null,null,"Roussillon ll with motor inside shaft and fixing under coping stones",{"$nulls":26},"Roussillon ll with motor inside shaft and wall fixing"]
[]
[]
["Embedding kit (For motor inside pit only)"]
[]
["Wall thickness : E =",{"$nulls":18},"cm"]
[]
["Wall conduit :",{"$nulls":14},"Already installed ",{"$nulls":10},"To provide"]
[]
["Please advise in any case even if installed :",{"$nulls":21},"110 mm",{"$nulls":7},"210 mm",{"$nulls":7},"310 mm"]
[]
[]
[]
["Overflow",{"$nulls":12},"No",{"$nulls":8},"Yes (Please advise its position below)"]
[]
[null,null,"All around the pool",{"$nulls":21},"On the length",{"$nulls":15},"On the width"]
[]
["Please provide a drawing with overflow dimensions  (the cover won't  conform, please send us the certificate of no conformity)"]
[]
[]
["Brackets "]
[]
[null,null,"To be fixed on the wall",{"$nulls":26},"To be fixed under coping stone"]
[]
[null,null," Without brackets (The cover won't conform, please send us the certificate of no conformity)\n"]
[]
[]
["Color of slats"]
[]
[null,null,"White",{"$nulls":11},"Blue",{"$nulls":11},"Sand",{"$nulls":10},"Grey",{"$nulls":9},"Polycarbonat"]
[]
[]
["Cut of stair and/or angles",{"$nulls":23},"No",{"$nulls":6},"Yes (please advise the kind of cut )"]
[]
[]
[{"$nulls":5},"Cut in form\n",{"$nulls":36},"Straight stair\n",{"$nulls":75},"cm"]
{"$rows_empty":7}
["Customer stamp",{"$nulls":33},"Ok for charges: "]

{"sheet":"2-4","index":1,"n_rows":78,"n_cols":40,"rows_kept":78,"merged":[[0,28,2,54],[3,0,4,1],[3,2,4,7],[3,8,4,9],[3,12,4,17],[3,18,4,37],[3,38,4,54],[6,0,7,54],[27,0,28,28],[27,29,28,32],[29,0,30,28],[29,29,30,32],[31,0,32,28],[31,29,32,32],[36,0,37,8],[36,10,37,12],[36,19,37,21],[38,0,39,11],[38,14,39,19],[38,25,39,30],[38,35,39,40],[40,0,41,11],[40,14,41,19],[40,25,41,30],[40,35,41,40],[50,0,51,8],[50,11,51,13],[50,20,51,22],[52,0,53,11],[52,14,53,19],[52,27,53,32],[52,39,53,44],[54,0,55,11],[54,14,55,19],[54,27,55,36],[54,39,55,50],[56,0,57,11],[56,14,57,19],[56,27,57,32],[56,39,57,44],[59,14,60,21],[59,22,60,23],[59,24,60,27],[59,29,60,30],[59,31,60,34],[68,0,69,20],[68,24,69,26],[68,33,69,35],[70,0,71,11],[70,14,71,19],[70,27,71,32],[70,39,71,44],[72,0,73,11],[72,14,73,30],[72,39,73,50],[74,0,75,25],[74,28,75,29],[74,30,75,33]]}
[{"$nulls":28},"SUBMERGED 2/4"]
[]
[]
[null,null,"Order",{"$nulls":9},"Quotation",{"$nulls":5},"Client ref:",{"$nulls":19},"Date :"]
[]
[]
["Width fosse :"]
{"$rows_empty":20}
["Dimensions between coping stones (1) :"]
[]
["Dimensions at water level for the beam (2) :"]
[]
["Dimensions at the axis level:"]
[]
[]
[]
[]
["Beam :",{"$nulls":9},"YES",{"$nulls":8},"No"]
[]
["Color :",{"$nulls":13},"White",{"$nulls":10},"Sand",{"$nulls":9},"Grey"]
[]
["Height :",{"$nulls":13},"110 mm",{"$nulls":10},"70 mm"]
[]
["Beam Support:",{"$nulls":13},"Pool construction",{"$nulls":20},"Adjustable"]
[{"$nulls":14},"(For beam 110 mm only)",{"$nulls":20},"(For beam 110 mm and 70 mm)"]
[]
[{"$nulls":14},"Pool renovation",{"$nulls":20},"To fixed on the wall"]
[{"$nulls":14},"(For beam 110 mm only)",{"$nulls":20},"For beam 110 mm and 70 mm)"]
[]
[]
[]
["Pit cover:",{"$nulls":10},"Yes",{"$nulls":8},"No"]
[]
["Colour:",{"$nulls":13},"IPE (wood)",{"$nulls":12},"White Alu",{"$nulls":11},"Sand Alu"]
[]
[{"$nulls":14},"Grey Alu",{"$nulls":12},"Composit Wood*",{"$nulls":11},"Composit Grey*"]
[]
["Width (P) :",{"$nulls":13},"700 mm",{"$nulls":12},"950 mm"]
[]
[]
[{"$nulls":14},"Customized* :",{"$nulls":7},"P =",{"$nulls":6},"L ="]
[]
[]
[]
[]
[]
[null,"* Composit pit cover are not available customized"]
[]
[]
["Partition and support partition :",{"$nulls":23},"Yes",{"$nulls":8},"No"]
[]
["Colour :",{"$nulls":13},"White",{"$nulls":12},"Sand",{"$nulls":11},"Grey"]
[]
["Fixation :",{"$nulls":13},"To be fixed under beam support",{"$nulls":24},"To be fixed on the wall"]
[]
["Pool depth at partition level:",{"$nulls":27},"H ="]
[]
[]
["If partition is not located  on flat bottom, please provide a drawing in cut where the partition will be located"]

{"sheet":"3-4","index":2,"n_rows":63,"n_cols":46,"rows_kept":63,"merged":[[0,29,2,54],[3,0,4,1],[3,2,4,7],[3,8,4,9],[3,12,4,17],[3,18,4,37],[3,38,4,54],[6,0,7,18],[9,38,9,40],[19,7,20,11],[19,40,20,45],[22,45,23,52],[27,7,28,11],[27,40,28,45],[30,0,32,54],[33,0,34,18],[35,37,36,53],[36,15,36,19],[37,49,37,53],[38,49,38,53],[39,49,39,53],[40,49,40,53],[41,0,41,3],[41,32,41,35],[41,49,41,53],[42,49,42,53],[43,49,43,53],[44,49,44,53],[45,49,45,53],[46,15,46,19],[46,49,46,53],[47,49,47,53],[48,11,48,24],[48,49,48,53],[49,11,49,12],[49,13,49,17],[49,18,49,19],[49,20,49,24],[49,49,49,53],[50,49,50,53],[51,49,51,53],[52,49,52,53],[53,49,53,53],[54,49,54,53],[55,6,55,12],[55,49,55,53],[56,49,56,53],[57,49,57,53],[58,2,58,5],[58,13,58,18],[58,19,58,21],[58,22,58,24],[58,25,58,27],[58,49,58,53],[59,2,59,5],[59,13,59,18],[59,19,59,21],[59,22,59,24],[59,25,59,27],[59,49,59,53],[60,2,60,5],[60,13,60,18],[60,19,60,21],[60,22,60,24],[60,25,60,27],[60,49,60,53],[61,2,61,5],[61,13,61,18],[61,19,61,21],[61,22,61,24],[61,25,61,27],[61,49,61,53],[62,2,62,5],[62,13,62,18],[62,19,62,21],[62,22,62,24],[62,25,62,27]]}
[{"$nulls":29},"SUBMERGED 3/4"]
[]
[]
[null,null,"Order ",{"$nulls":9},"Quotation",{"$nulls":5},"Client Ref :",{"$nulls":19},"Date :"]
[]
[]
["skimmers Position"]
[]
[]
["1) skimmer type:",{"$nulls":12},"Vertical to lining",{"$nulls":19},"Protruding",{"$nulls":7},"cm"]
[]
["2) Check skimmers position on below drawing"]
[]
["3) If the skimmers are the one width, please advise dimensions S1, S2 or S3, S4 as per roller position"]
[]
[null,null,"No skimmer (Please advise filtration system and provide a drawing in case of filtering block)"]
[]
[]
[]
[]
[]
[]
[{"$nulls":45},"SK = Skimmer"]
{"$rows_empty":10}
["Pool size"]
[]
["Dimensions must be given in metres and taken at water level",{"$nulls":36},"Width dimensions taken every metre at water level"]
[]
[{"$nulls":37},"1 m from CD width"]
[{"$nulls":37},"2 m from CD width"]
[{"$nulls":37},"3 m from CD width"]
[{"$nulls":37},"4 m from CD width"]
[{"$nulls":37},"5 m from CD width"]
[{"$nulls":37},"6 m from CD width"]
[{"$nulls":37},"7 m from CD width"]
[{"$nulls":37},"8 m from CD width"]
[{"$nulls":37},"9 m from CD width"]
[{"$nulls":37},"10 m from CD width"]
[{"$nulls":37},"11 m from CD width"]
[{"$nulls":11},"Diagonals",{"$nulls":25},"12 m from CD width"]
[{"$nulls":11},"AC",{"$nulls":6},"BD",{"$nulls":18},"13 m from CD width"]
[{"$nulls":37},"14 m from CD width"]
[{"$nulls":37},"15 m from CD width"]
[{"$nulls":37},"16 m from CD width"]
["Angles",{"$nulls":36},"17 m from CD width"]
[{"$nulls":37},"18 m from CD width"]
[{"$nulls":6},"Square",{"$nulls":6},"Round (cm)",{"$nulls":5},"Cut angles (cm)",{"$nulls":17},"19 m from CD width"]
[{"$nulls":37},"20 m from CD width"]
[{"$nulls":37},"21 m from CD width"]
[null,null,"Angles",{"$nulls":10},"R",{"$nulls":5},"P",null,null,"P1",null,null,"P2",{"$nulls":11},"22 m from CD width"]
[null,null,"A",{"$nulls":34},"23 m from CD width"]
[null,null,"B",{"$nulls":34},"24 m from CD width"]
[null,null,"C",{"$nulls":34},"25 m from CD width"]
[null,null,"D"]

{"sheet":"4-4 ","index":3,"n_rows":56,"n_cols":51,"rows_kept":56,"merged":[[0,29,2,54],[3,0,4,1],[3,2,4,7],[3,8,4,9],[3,12,4,17],[3,18,4,37],[3,38,4,54],[6,0,7,18],[11,31,11,37],[14,27,14,30],[14,38,14,43],[14,44,14,46],[14,47,14,49],[14,50,14,52],[15,2,15,4],[15,11,15,14],[15,20,15,22],[15,27,15,30],[15,38,15,43],[15,44,15,46],[15,47,15,49],[15,50,15,52],[16,27,16,30],[16,38,16,43],[16,44,16,46],[16,47,16,49],[16,50,16,52],[19,20,19,23],[26,31,26,37],[29,27,29,30],[30,27,30,30],[30,38,30,43],[30,44,30,46],[30,47,30,49],[30,50,30,52],[31,3,31,5],[31,11,31,14],[31,20,31,22],[31,27,31,30],[31,38,31,43],[31,44,31,46],[31,47,31,49],[31,50,31,52],[32,27,32,30],[32,38,32,43],[32,44,32,46],[32,47,32,49],[32,50,32,52],[33,27,33,30],[33,38,33,43],[33,44,33,46],[33,47,33,49],[33,50,33,52],[34,2,34,5],[34,20,34,23],[37,11,37,14],[42,31,42,37],[45,27,45,30],[46,27,46,30],[46,38,46,43],[46,44,46,46],[46,47,46,49],[46,50,46,52],[47,3,47,5],[47,11,47,14],[47,20,47,22],[47,27,47,30],[47,38,47,43],[47,44,47,46],[47,47,47,49],[47,50,47,52],[48,27,48,30],[48,38,48,43],[48,44,48,46],[48,47,48,49],[48,50,48,52],[49,27,49,30],[49,38,49,43],[49,44,49,46],[49,47,49,49],[49,50,49,52],[50,2,50,5],[50,20,50,23],[53,3,53,5],[53,11,53,14],[53,20,53,22],[55,0,56,54]]}
[{"$nulls":29},"SUBMERGED 4/4"]
[]
[]
[null,null,"Order",{"$nulls":9},"Quotation",{"$nulls":5},"Client Ref:",{"$nulls":19},"Date :"]
[]
[]
["Stairs"]
[]
[]
["Roman Stair(constant radius)"]
[{"$nulls":31},"Angles"]
[{"$nulls":31},"Square",{"$nulls":6},"Round (cm)",{"$nulls":5},"Cut angles (cm)"]
[]
["Dimensions (measured at water level)"]
[{"$nulls":27},"Angles",{"$nulls":10},"R",{"$nulls":5},"P",null,null,"P1",null,null,"P2"]
[{"$nulls":27},"E"]
[{"$nulls":27},"F"]
[]
[]
[]
[]
[]
["Caution: in case of not round stairs or with no constant radius, please provide a gabarit"]
[]
["Straight stairs"]
[{"$nulls":31},"Angles"]
[{"$nulls":31},"Square",{"$nulls":6},"Round (cm)",{"$nulls":5},"Cut angles (cm)"]
[]
[]
["Dimensions taken at water level",{"$nulls":26},"Angles",{"$nulls":10},"R",{"$nulls":5},"P",null,null,"P1",null,null,"P2"]
[{"$nulls":27},"E"]
[{"$nulls":27},"F"]
[{"$nulls":27},"G"]
[{"$nulls":27},"H"]
[]
[]
[]
[]
[]
[]
["Trapezoid stairs"]
[{"$nulls":31},"Angles"]
[{"$nulls":31},"Square",{"$nulls":6},"Round (cm)",{"$nulls":5},"Cut angles (cm)"]
[]
["Dimensions taken at water level"]
[{"$nulls":27},"Angles",{"$nulls":10},"R",{"$nulls":5},"P",null,null,"P1",null,null,"P2"]
[{"$nulls":27},"E"]
[{"$nulls":27},"F"]
[{"$nulls":27},"G"]
[{"$nulls":27},"H"]
[]
[]
[]
[]
[]
["Note: If the stairs are not positioned as per above drawings, please provide a drawing with roller position."]